Products
Filters
Propane Gauge / Leak Detector
Never run out of LP again with this gas gauge and leak detector. Installs easily on the LP bottle and gives an accurate reading of how much propane...
View full detailsPropane Safety label
Measures 6 inches wide by 3-1/2 inches tall. Part number 4716-8701
Propane Safety Label
Measures 4 inches wide by 2-1/2 inches tall. Part number GD0002
Propane Safety Label
Measures 3 inches wide by 3 inches tall. Part number 4799C8642
Propane Tank Lock
Lock two propane tanks to your camper to help prevent theft. The loc works with conventional setups and fits ½-inch and 3/8-inch threaded posts. A ...
View full detailsPulley Cable Retainer
The application for this pulley retainer is at the cable routing just past the whiffle tree. Typically 2 pulleys are stacked one on top of each oth...
View full detailsPulley Pin
Pin for lift system pulleys. Measures 1 inches in length. Part number 4731B252
Pulley Pin With C Clip 3/4"
Used to hold the lift pulleys in brackets inside the lift arms. This shorter pin is most commonly found at the top stage pulley. Measures 3/4 of an...
View full detailsPulley Pin With C Clip 7/8"
Used to hold the lift pulleys in the stage brackets on lift arms. This longer pin is most commonly found at the lower stages. The next upper stage ...
View full detailsPulley Plate
This plate is found in the pulley routing block just past the whiffle tree. Measures 4-1/4 inches long by 1-3/8 inches tall. Part number 4720F154
Pulley Routing Pin
The applications for this pulley pin are at the cable routing guide just past the whiffle tree. Typically 2 pulleys are stacked one on top of each ...
View full detailsPulley Spacer
Located just past the whiffle tree. This separator bracket is used to mount the 4 lift system pully's and guide the cables out from the whiffle tre...
View full detailsPulley Spacer
Located just past the whiffle tree. This separator bracket is used to mount the 4 lift system pully's and guide the cables out from the whiffle tre...
View full detailsPush Fastener
Fills screw access holes and similar. Also commonly called accordion rivets. Measures 3-8" X 3/4" Part number 4753-3341
Putty Tape Roll
Used to install corner caps, storage doors, hatches and more. Creates a weather tight seal behind the installed part. Measures 3/16 Inch thick by ...
View full detailsQueen Canvas Bed Boot 2009 Evolution Used
Sunbrella canvas with black vinyl border. Good used condition for only minor marks and blemishes. This boot features two sections of chock cord, on...
View full detailsQuick Connect
Propane Quick-Connect Kit is for use with low pressure propane systems. Quickly and easily add a convenient connect/disconnect method with an addit...
View full detailsQuick Connect Kit
Propane Quick-Connect Kit is for use with low pressure propane systems. Quickly and easily add a convenient connect/disconnect method with an addit...
View full detailsQuick Disconnect 1/4" Male
C.S.A. certified for natural gas and L.P. gas - air mixtures. Interchanges with Hansen and Sturgis brands. Quick disconnect rated to 1/2 P.S.I. Par...
View full detailsRatchet Paw Kit
The ratchet paw is part of the mechanical brake for most lift systems. This cam engaging the ratchet wheel sprocket is what gives the Coleman and F...
View full detailsRatchet Paw Spring
This spring holds the ratchet paw cam onto the ratchet wheel gear. The ratchet paw is what gives the Coleman and Fleetwood pop ups their familiar c...
View full detailsRatchet Safety Label
Measures 2 inches wide by 2 inches tall. Part number 4714-0015
Ratchet Wheel
This is the gear that the ratchet paw rides on, making the familiar clickety-click sound when the roof is raised. This gear has a total of 15 teeth...
View full detailsReading Light With Cigar Plug
12 volt reading light for Americana, Destiny, Pioneer and Colorado units with cigar style power ports. Features a cigarette lighter style 12 volt p...
View full details