Beds

These bed rails works with almost every Coleman and Fleetwood pop up built prior to June 1997. Ready to install and set for most king sized beds an...

Found on units built before 1997 that use roller style bed rails. This pin in installed in the top deck rail, and acts as a stop for the wheels and...

Bed roller wheel and bracket for pre 1997 Coleman and Fleetwood pop ups. This is the roller wheels that rivet to the side of the bed. Two of these ...

Used in pre-1997 bed rails. Spaces the roller wheels out further if required. Some units require up to 3 roller spaces between the bed frame and th...

Fits 1998 and newer bed rails. These wheels can be found both at the deck track, and the bed extension frame. Four rollers are found on each rail. ...

Found on units produced after 1997. This bracket rivets to the sides of the bed frame, and mounts the bed roller through the center hole. Here is a...

Bed frame sections for the pull out beds. This twin kit replaces the sides of the bed frame. Directly compatible to the following unit and location...

Bed frame sections for the pull out beds. This twin kit replaces the sides of the bed frame. Directly compatible to the following unit and location...

Bed frame sections for the pull out beds. This twin kit replaces the sides of the bed frame. Directly compatible to the following unit and location...

Metal bracket used to join bed frame sections together. Holes accept 3/16th sized rivets. Six in total. Measures 7-1/4 inches by 7/8th of an inch. ...

Metal bracket used to join bed frame sections together. Holes accept 3/16th sized rivets. Six in total. Measures 7-1/4 inches by 7/8th of an inch. ...

Used to space the bed roller on bed rail on post 98 bed rails. Measures 1-5/8 inches in width by 1/8 of and inch thick. Part number 4757A924

Found on Clipper pop ups, this plunger acts as the lock for the bed rails. Four are found on each unit. Pulling the knob up allows the bed system t...

Found inside the track rails for pre-1997 bed extensions that use bed rails with roller wheels. Two small pins and double sided automotive tape hol...

Ready for the most common bed size: king. Easily adapted to bed sizes queen and double. Included is one bed rail. Additional hardware such as rolle...

This bed rail fits Fleetwood pop ups built after 1998. Please select your size from the drop down menu above. Video available Shows how to remove ...

This wheel is commonly found on Pioneer and Destiny series units built prior to 1997. The roller wheel sits at the front of the rail and acts as gu...

This wheel fits 1997 and prior Coleman and Fleetwood bed rails. The roller wheel sits at the front of the rail and acts as guide for the bed extens...

Hard plastic slide rails for smaller Coleman and Fleetwood pop ups. These slides work with the bed extensions that do not have rollers. Video avai...

Rectangular hard plastic slide rails for mid 1990's Destiny series Coleman and Fleetwood pop ups. These slides work with the bed extensions that do...

Plastic slide wedge found on certain Destiny series units. This plastic wedge is mounted to a countertop, and acts as a guide for the bed rails whe...

The bed slide wedge is found on the inside of the bed rails on Fleetwood pop ups built after 1998. Installed on the inside of each rail they help k...

This end cap is found at the end of the bed rails on Fleetwood pop ups built after 1998. It is attached with a single bolt and nut to the end of th...