Crank Assemblies

This kit rebuilds later model chain driven upper crank assemblies. Both upper crank systems and LH chain driven cranks. When use in LH crank system...

This kit rebuilds the most popular direct drive center mounted crank assemblies. Rebuilds 6311 and 3000 series systems. Features a 7-3/4 inch long ...

Let us do the cutting for you! These bolt end cables are designed for Coleman and Fleetwod pop ups built after 1999.  How to install cables With ...

One of the two main lift cable types. This bolt end cable measures 225-3/4" long, and is sized for the largest sized box with this cable option. Ea...

One of two main lift cable types. This loop end cable measures 250" long and is sized for the largest sized box with this cable option. Easily size...

Designed to cut Coleman and Fleetwood lift cables and crimp them closed. This heavy duty swaging tool makes the job of installing lift cables much ...

The whiffle tree is the threaded rod mounted in the bottom of the pop up. A draw bar runs up and down the rod, and pulls or releases the lift cable...

The whiffle tree is the threaded rod mounted in the bottom of the pop up. A draw bar runs up and down the rod, and pulls or releases the lift cable...

The whiffle tree is the threaded rod mounted in the bottom of the pop up. A draw bar runs up and down the rod, and pulls or releases the lift cable...

The whiffle tree is the threaded rod mounted in the bottom of the pop up. A draw bar runs up and down the rod, and pulls or releases the cables. Th...

The whiffle tree is the threaded rod mounted in the bottom of the pop up. A draw bar runs up and down the rod and pulls or releases the cables. The...

The whiffle tree is the threaded rod mounted in the bottom of the pop up. A draw bar runs up and down the rod, and pulls or releases the cables. Th...

The whiffle tree is the threaded rod mounted in the bottom of the pop up. A draw bar runs up and down the rod, and pulls or releases the cables. Th...

The whiffle tree is the threaded rod mounted in the bottom of the pop up. A draw bar runs up and down the rod and pulls or releases the cables. Thi...

This chain drive crank system is commonly located behind a rear body panel. This is the compression system and ratchet upper crank. When you turn t...

This chain drive crank system is commonly located behind a rear body panel. This is the compression system and ratchet upper crank. When you turn t...

This chain drive crank system is commonly located behind a rear body panel. This is the compression system and ratchet upper crank. When you turn t...

This is the crank assembly found in 12 foot box models from 1999 till 2002. It is installed at the left hand side of the bumper. A chain drives the...

This popular crank system for Coleman and Fleetwood pop ups is for units with lower direct drive lifts. This crank is found in the rear bumper, dir...

Popular on 1990's Destiny Series Trailers. This crank system for Coleman and Fleetwood pop ups is found on units with lower direct drive lift syste...

Directly matched to a 1986 Plantation series Savanah.  This assembly features the mounting plate and 24 tooth chain drive gear. This system uses a ...

The lift lock pulls over the whiffle tree and locks the roof in place. Found most commonly on smaller box sized units, that have no crank system. C...

Used to raise and lower the roof on many Starcraft Flagstaff Rockwood Palomino and  Dutchmen units. Directly compatible to the following units. St...