Produits
Propane Tank Lock
Lock two propane tanks to your camper to help prevent theft. The lock works with conventional setups and fits ½-inch and 3/8-inch threaded posts. A...
Afficher tous les détailsPulley Bracket Pin
This pins holds the lift system pulleys in the following locations on the camper. Adjustable pulley brackets Lift arm butterfly pulley bracket Me...
Afficher tous les détailsPulley Cable Retainer
The application for this pulley retainer is at the cable routing just past the whiffle tree. Typically 2 pulleys are stacked one on top of each oth...
Afficher tous les détailsPulley Pin
Pin for lift system pulleys. Measures 1 inches in length. Part number 4731B252
Pulley Pin With C Clip 3/4"
Used to hold the lift pulleys in brackets inside the lift arms. This shorter pin is most commonly found at the top stage pulley. Measures 3/4 of an...
Afficher tous les détailsPulley Pin With C Clip 7/8"
Used to hold the lift pulleys in the stage brackets on lift arms. This longer pin is most commonly found at the lower stages. The next upper stage ...
Afficher tous les détailsPulley Plate
This plate is found in the pulley routing block just past the whiffle tree. Measures 4-1/4 inches long by 1-3/8 inches tall. Part number 4720F154
Pulley Plate
This plate is found in the pulley routing block just past the whiffle tree and acts as a cover or skid plate. Part number 4720-1551
Pulley Routing Pin
The applications for this pulley pin are at the cable routing guide just past the whiffle tree. Typically 2 pulleys are stacked one on top of each ...
Afficher tous les détailsPulley Spacer
Located just past the whiffle tree. This separator bracket is used to mount the 4 lift system pully's and guide the cables out from the whiffle tre...
Afficher tous les détailsPulley Spacer
Located just past the whiffle tree. This separator bracket is used to mount the 4 lift system pully's and guide the cables out from the whiffle tre...
Afficher tous les détailsPush Fastener
Fills screw access holes and similar. Also commonly called accordion rivets. Measures 3-8" X 3/4" Part number 4753-3341
Putty Tape Roll
Used to install corner caps, storage doors, hatches and more. Creates a weather tight seal behind the installed part. Measures 3/16 Inch thick by ...
Afficher tous les détailsQuick Connect
Propane Quick-Connect Kit is for use with low pressure propane systems. Quickly and easily add a convenient connect/disconnect method with an addit...
Afficher tous les détailsQuick Connect Kit
Propane Quick-Connect Kit is for use with low pressure propane systems. Quickly and easily add a convenient connect/disconnect method with an addit...
Afficher tous les détailsQuick Disconnect 1/4" Male
C.S.A. certified for natural gas and L.P. gas - air mixtures. Interchanges with Hansen and Sturgis brands. Quick disconnect rated to 1/2 P.S.I. Par...
Afficher tous les détailsQuick Disconnect Cover
Cover and hinge kit that closes off the propane quick disconnect on many models. Commonly found under the exterior stove / table support rail. Meas...
Afficher tous les détailsRatchet Bracket Crank Assembly Used
Directly matched to 1989 through 1993 Americana series Coleman pop up campers. The chain exits the right hand side of this system. This crank assem...
Afficher tous les détailsRatchet Pawl Kit
The ratchet pawl is part of the mechanical brake for most lift systems. This cam engaging the ratchet wheel sprocket is what gives the Coleman and ...
Afficher tous les détailsRatchet Safety Label
Measures 2 inches wide by 2 inches tall. Part number 4714-0015
Ratchet Wheel
This is the gear that the ratchet paw rides on, making the familiar clickety-click sound when the roof is raised. This gear has a total of 15 teeth...
Afficher tous les détailsReading Light Lens
Used on the clip on reading lights popular in the 1990's and early 2000's. Here's an example of the lamp that this lens works with. Measures 4 inc...
Afficher tous les détailsReading Light With Cigar Plug
12 volt reading light for Americana, Destiny, Pioneer and Colorado units with cigar style power ports. Features a cigarette lighter style 12 volt p...
Afficher tous les détailsRear Body Panel 79.25 X 22.25
Measures 79-1/4 inches wide by 22-1/4 inches tall. Please note : This item is shipped via freight systems within the United States. Please allow 2 ...
Afficher tous les détails