There was an error signing up for restock notifications. Please try again.
Sign up for restock notifications
Notify Me
This popular crank system for Coleman and Fleetwood pop ups is for units with lower direct drive lifts. This crank is found in the rear bumper, directly through the center.
Mounting bracket measures 6-1/2 inches across to the centers of the 4 outer bracket mounting holes.
Inner mounting bracket measures 2-7/8 inches to the centers of the mounting holes.
Drive hub extension measures 6-3/8 inches in length as measured from the mounting plate.
Overall length of the assembly is 10 inches.
Rebuilt Options Are Available
Our rebuilt versions are built and tested using the very best of used and sometimes new parts. Every system is personally inspected by Derek and guaranteed to preform as good as new.
Crank handles are available
Cordless drill crank adapters are available
Part number 4759-6311
Customer Reviews
Overall rating: 4.7 / 5 from 40 reviews.
Yes! Thank you Derek for the how to videos. My new to me 2006 Fleetwood Cobalt can now be cranked up with just one arm. It took all my strength of both arms before the repair of replacing the 6311 thrust bearing. Thank you!
Exactly the replacement I needed for my 99 Coleman Fleetwood Mesa. The difference in lowering and raising the roof from installing the new assembly is remarkable! Thanks again for having the selection of parts you do!
Shortly after we bought the camper, the crank mechanism broke clean off. Thankfully we found this site and they had an exact match! Took about 90 minutes to remove and reinstall, and their website has tons of helpful videos to make the process easy. Highly recommend!
Parts matched great except the brass spacer between chain cog and bearing. Was little to long for install. It was placed on a fleet wood e3 tent trailer. I trimmed spacer approx 1/8” and then boom. It worked.
Purchasing was super easy with parts catalog to match the part numbers. Only issue was one of the holes was slightly off to fit the roll pin in so I had to use a different pin. Other than that direct for replacement!
Was fairly easy to install
This fit our 1996 coleman Taos perfectly. Holes lined up, make sure you don’t put it on upside down (look at the plates that attach to top and bottom to keep out debris to help you).
Exact part match. The pop up I am repairing has no make model or serial numbers on it. Your web site had great detail on parts and I was able to find the correct one.
It's really hard to keep the ratchet pole in place when you try to install the whole thing. By the time we get it hooked to the whiffletree, it's off the ratchet. Really a pain in the butt.
The part was exactly what we needed and our tent cranks up nicely. The installation was a little tricky. It would have been nice to have clear instructions with diagrams.
The buying experience and tech support was great. But there were no instructions that came in the box to help or give you any tips on installing. And of all the videos on the site I could not find one where Derek is actually underneath the camper removing and installing a replacement direct drive assembly. I figured it out and the new assembly works fine.
It works good, was a pain to drive out the pins that connect it to the threaded rod. Ended up taking off cables and pulling the pin coupling out over the bumper to get a better wack at the pins. Works good now!
This was a life saver. Only comment is that the screws that came with it were the wrong size. Too small so had to make extra trip to hardware store for the correct ones. Would also suggest new bolts to attach to the frame be included. At a price of $350 plus 4 new bolts could have been included.
This fit perfectly on a 2006 Fleetwood Evolution E2. The pin holes lined up and was a bolt on replacement. I did not realize how stiff the old crank bearings and system had become until I was able to turn the shaft by hand without the crank.
The product sent to me worked fine. Because I was replacing parts your parts with original parts on my camper, they were built differently. You must provide some installation instructions as there were none. We had to figure it out. Ultimately with no instructions on your parts, we had to combine your (expensive) assembly with old parts to make the functionality of my camper work. Due to the inconvenience of the adjustments required, it took some additional days to complete the installation. My opinion, quality parts but with no instructions...not a quality solution. Put yourself in your buyer's shoes and not just the seller's shoes. Simple business. I'm 50-50 on whether I would order from you again.
Store owner replied:
James, for future consideration, please take a look at the link INSTRUCTIONS for all the how to for installation and maintenance of lift system components and more. We also have a growing video instructional library under the link VIDEOS. lastly please call! We can typically assist you with almost any technical question.
WAS THE RIGHT PART AND IT WAS EASY TO LOOK UP THE PARTS NEEDED
So my husband took our 1999 Coleman Destiny Santee to a local rv shop they had it for two weeks and could not fix it. My husband found this website and decided to do it himself. The parts he found at this website were EXACTLY what he needed. He later had to order a Whiffle Tree from here as well. With some modification it all worked!! Our popup functions as if New!
Craig,Jessica, and Derek were awesome. Ensured I received the right parts and we very helpful. Crank assembly and wiffletree assembly were a perfect match and work great!
This part was badly needed and this supplier was the only source I could find for this part from a company no longer in buisness.as original quality supplied in a quick fashion.
