Pre 97 Bed Rail 67-7/16" Used
Removed from a 1996 Shenandoah, series 3090.
This bed rail features an end roller wheel sized to 2-1/8 inches. The wheel is set to stationary.
For installation, remove the old rail from the bed frame and install the stop plate and roller kits in the same positions as your original rail. Every last piece of hardware is included with this kit for an easy install.
Includes:
- 1 Bed rail
- All required rivets
- All required stop plates
- 2 Roller assemblies
- 1 Stop screw and washers
One bed rail services one bed extension side. Two rails are required to service one complete bed extension.
Measuring for your new bed rail.
This rail is pre piloted for a specific application. In the product images, and at the INSTRUCTIONS link located at the top of the webstore you can find the dimension chart and modification chart to assist you in installation.
Dimension Chart
Using the dimension chart, this rail has the following length and stop locations.
- A = 67-7/16"
- C = 22-7/8"
Choosing the correct Wheel Size
The two options with these bed rails are the large single wheel that is attached to the end of the rail. This wheel on your pop up camper will measure either 2-1/8 inches or 2-1/4 inches. Sometimes if your wheel is worn or has a factory flat spot, it is easier to measure the inside of the guide rail attached to the camper.
Part number 4755-5111-USED
