Crank Assemblies

Used to hold the lift pulleys in the stage brackets on lift arms. This longer pin is most commonly found at the lower stages. The next upper stage ...

Commonly found in butterfly brackets in the bottom of lift pillars. Measures 3/4 inches in length. Part number 4720C1578

The applications for this pulley pin are at the cable routing guide just past the whiffle tree. Typically 2 pulleys are stacked one on top of each ...

Pin for lift system pulleys. Measures 1 inches in length. Part number 4731B252

This is the assembly that is pinned to the back of the power lift motor. In the instance of a failure in the power lift system, you can manually ov...

Couples the power lift motor to the whiffle tree. Measures 4 inches in length.  Part number 4773-9081

Couples the power lift motor to the whiffle tree. Measures 6 inches in length. Part number 4768-0851

Used in Cobalt and Graphite models to stabilize the crank extension. Measures 2 inches by 2 inches. 3/4 inch inside diameter hole. Part number 4768...

Guide for lift system pulleys. Series 2800 Measures 3 inches by 2-1/2 inches. Part number 4751-6031

Guide for lift system pulleys. Series 2800 Measures 3 inches by 2-1/2 inches. Could come in black or unpainted metal. Part number 4751A6021

Socket cup for the end of the whiffle tree. This socket is installed into the campers frame opposite of the crank assembly, and allows the whiffle ...

The ratchet paw is part of the mechanical brake for most lift systems. This cam engaging the ratchet wheel sprocket is what gives the Coleman and F...

This is the gear that the ratchet paw rides on, making the familiar clickety-click sound when the roof is raised. This gear has a total of 15 teeth...

This spring holds the ratchet paw cam onto the ratchet wheel gear. The ratchet paw is what gives the Coleman and Fleetwood pop ups their familiar c...

Safety latch to lock the lift system in early Coleman pop up campers. This catch is typically attached to the front or rear of the unit and catches...

This eye bolt is found on the draw bar of acme nut whiffle trees. Attaches the cables to the whiffle tree. The adjustment of this eye bolt provides...

Used on every Coleman and Fleetwood crank assembly that uses a drive hub extension tube. This collar installs in the front crank housing plate. The...

Metal spacer in 6311 series direct drive lift systems. The drive shaft accepts through this spacer. Measures 1 inch wide and 3/4 inch tall. 5-/8 in...

The drive hub pin is most commonly found installed at the end of drive hub extension. This is the pin that the crank handle grabs onto in order to ...

This is the most common lift system pins found in Coleman and Fleetwood pop ups. Applications include Whiffle trees Drive couplers Thrust nuts Gea...

Used in lift systems to pin gears and couplers together. Measures 1 inch in length. Part number 4744-1351

The primary application is to pin the chain drive gear to the drive shaft in upper, and LH crank assemblies. Measures 1-1/2 inches long. Part numbe...

Roll pin used in multiple applications. Applications include, Drive couplers Gears The chain sprocket to the upper and LH crank assemblies. This a...

Measures 1-1/8 inches in length. Part number 4701-3261