This is the original Coleman / Fleetwood top seal.
It comes by a 41 foot roll to fit any and all Coleman or Fleetwood pop up that has an ABS roof.
Your new roof seal was recently manufactured to offer the best in today's seal technology to better protect your camper. A double sided adhesive tape inside the seal allows you to install this product with no glue.
The channel of the seal is about 3/8 of an inch wide at the opening that accepts onto the bottom edges of the roof. The whole seal stands 1-1/2 inches tall.
Here is some information to assist you in determining exactly which roof your pop up has.
What is the material that your roof is made of?
ABS plastic. This roof is one piece, having rounded sides and corners. The roof seal attaches directly to the bottom of this roof.
Part number 4716-2221
Directly compatible to the following models with ABS roof's.
Bayport
1996 1997
Bayside
1998 1999 2000 2001 2002 2003
Carmel
2003
Casa Grande
1998
Cheyenne
1996 1997 1998 1999 2000 2001 2002 2003
Grandview & Grandview SP
1998
Key West
1996 1997
Laramie
1996
Laredo
1996 1997
Mesa
1998 1999 2000 2001 2002 2003
Monterey
2003
Natchez
1998
Niagara
1996 1997 1998 1999 2000 2001 2002 2003
Redwood
1998
Rio
1998
Santa Fe
1996 1997 1998 1999 2000 2001 2002 2003
Sea Pine
1997 1998 1999 2000 2001 2002 2003
Sedona
1996
Shenandoah
1996
Sun Valley
1996 1997 1998 1999 2000 2001 2002 2003
Sunridge
1997 1998
Taos
1996 1997 1998
Utah
1999 2000 2001 2002 2003
Westlake
1997 1998 1999 2000 2001 2002 2003
Yukon
1996 1997
Customer Reviews
Overall rating: 4.7 / 5 from 374 reviews.
Fit perfectly!!!!
Amy F.5/5Verified
its exactly what i ordered , if there is one issue i had a bit of trouble getting the seal , to set against the body of the trailer' the delivery was exactly when they said , top quality seal , so would i order from them , yes most definitely
Walter P
Walter P.4/5Verified
Easy install, came with plenty of seal so that don’t have to worry about being short.
Randall J.5/5Verified
The new seal was exactly what my wife and I needed to redo the top of our new to us 2000 Coleman Sun Valley pop up trailer! It’s high quality and we had a few feet left to spare!
We did order it in early June however thinking it’d be here in plenty of time for our annual 4th of July trip and once it got within a week of the trip and still hadn’t arrived we were getting nervous. So I emailed the company and they got it shipped out fast to make sure it got here in time. Very pleased with the website and will definitely be ordering from again! Thank you!!
Sean M.5/5Verified
I prepared the surface of the camper, used a little gasket glue(just in case), and started banging it on! Tough around the corners, even with a heat gun. The wife helped hold it straight so it didn't get dirty. She fed it to me out of the box. A lot of work, but it looks great and hopefully will keep the rain out. Previous owner installed a non coleman gasket. It was rotted and looked like it didn't fit. This one is definitely better than the ones half the price.
Michael G.5/5Verified
I have a 2002 Coleman Sun Valley and I recently replaced the ABS roof and I needed a seal. It worked great installation was easy. We recently had a windy thunderstorm and I checked the interior for leaks no leaks whatsoever. It’s a great product and I recommend it.
Taj J.5/5Verified
The corners were a little tough but with two people doing it made it a lot easier. The seal hadn’t been replaced since the camper was new so it was definitely needed. I was glad you had it in stock because we couldn’t find it anywhere in town.
Mark V.5/5Verified
Shipping was quick and the seal was really easy to install. The installation video was very helpful! Highly recommend.
Alison M.5/5Verified
I had to remove my abs on rooftop as it was destroyed. This did not stick well to the abs inside and I fear I will have to remove it and glue it.
Danielle G.3/5Verified
When I got my pop up the seal was beyond done. The first thing I did along with ordering a new cover was to order the new seal.
I pulled the old seal off, cleaned the top as how Derrick said in the video, and had it done all in a bit over an hour.
Richard H.5/5Verified
The seal fits perfect, but I sure wish you would ship to Alberta Canada, the only province you dont ship to.
Rose D.5/5Verified
Product was perfect and easy to install. Arrived timely. Great company to do business with for you camper needs
Joseph P.5/5Verified
Went on like a breeze thank you
Rose M.5/5Verified
Please, please don’t be cheap and use epoxy for a quick fix on an old seal! Spend the money and get a new seal. It took me 5 hours to replace it. We bought a 2000 bayside and the seal started falling apart. The video was a huge help. When I started taking it off it, was a total pain! New one is on, I have to silicone some areas to water proof it. If you take care of the old models they will take care of you.
Israel S.5/5
The seal fit good. Followed the video directions from the site. Added a before and after photos. Hardest part was cleaning the edge before installing the new seal. The new seal spread pretty wide across the front but was because of the camper top not the seal. I added some white exterior cauking along the front edge to keep water from laying in between the seal and the camper top. Seems to be a qood, quality seal.
Scott B.5/5Verified
The old rubber seal was original the the pop-up, ordered a new one from Coleman Pop-up Parts when I was refreshing the top. The to refresh turned out great and the new seal was a little long too make sure it went all the way around, but with a little trimming it turned out great.
Daniel H.5/5Verified
The part arrived quickly and was the exact fit. The video was extremely helpful and made for a quick installation. So glad for this resource for our pop up!
Therese L.5/5
Extrusion as described, worked great, went on easy folling the directions.
Kevin G.5/5Verified
Worked great and it was easy to install.
David M.5/5Verified
Great fit. Even had a bit extra. Cut well and really liked that it had the adhesive strip. Anxious to see how it holds up. Really added the final touch to our top restoration.
William V.5/5Verified
Received order pretty fast. Product was hard to put on at first by myself but once I got it started wasn’t to bad.
Tricia G.5/5Verified
Colmen Cheyenne 2001 the seal fits and installs easily. Being in the north west rain is frequent and I’m happy to have purchased it.
Jonathan W.5/5Verified
There part fit great and was easy to install.
John R.5/5Verified
Roof seal arrived in time and we were able to install it without any problems after watching the Coleman Parts video. We love the product.
Betty A.5/5Verified
Perfect fit. Old seal was in bad shape. Very happy with this as it will allow my family more time to enjoy the camper
Dakota S.5/5Verified
Good fit w extra to trim whitch is good let's see how it holds up !
Jose R.5/5Verified
Watched the video and it goes on so easy, will need a rubber mallet it will help with installation. It is a 1person job but an extra set of hands is always nice. Great product seems better than the original.
Marshall H.5/5Verified
Worked perfectly
Sam S.5/5Verified
Wiping down the roof to clean off the old gunk and silicone from the previous owners “fix”
James H.5/5Verified
Seems to fit ok fairly easy to install
Brandon W.4/5Verified
Was easy to install and desks really well
Brett M.5/5Verified
Fit Perfect and Easy to install
Richard W.5/5Verified
Was a perfect fit and had extra left over. Plus, fast shipping. Ty
Robert T.5/5Verified
Nice but a little narrow and could be wider to really catch hold. A little pricy compared to others.
James K.4/5Verified
Wow! That ABS gasket came in a timely manner and the how-to video was spot on! Thanks for being a great company!
Lauren L.5/5Verified
Worked perfectly. Followed the instructions from the video. Cleaned thoroughly, used the alcohol solution and used the rubber mallet (a necessity). Thanks.
Eric M.5/5Verified
it is a great looking seal. After watching Derek Smith's video on how to install the new top seal, I felt really comfortable to be able to do the job. After I started to remove the old seal, it literally fell off. The HARD part was the next 4+ hours it took to take off residual glueing for the old seal. Installation was tricky going around the corners. Dereks video showing the use of heat gun was a great life saver (See my picture). Derek makes it look really easy. Not quite but really rewarding to see what you can do when all done.
Kalani M.5/5Verified
Exactly what I needed to do some much needed updates to my used trailer. I watched a few YouTube videos that showed how to do the overall replacement, then purchased the gasket from y'all. It was easier than expected. Quality product that should last many seasons.
Jeff W.5/5Verified
Product was exactly what I ordered, and the Coleman pop up videos on YouTube are very helpful.
Justin D.5/5Verified
Replacement was easy but it need to be a little thicker to make a good seal.
