Hardware

Right angle filler bracket with rivets. Painted brown. Series 2300 Measures 3-1/2 inches in length with a 1 inch width on each side. Part number 47...

Installs at the ceiling under the duck bill support bracket. This pad creates friction for the duck bill, helping keep the tent support pole in pla...

License plate nut with a square back   these are found in the rear body panels of many pop up campers. They accept into a square hole, and hold the...

Measures 1-1/8 outside, 5/8 inside. Thin cut in the middle for installation. Used for routing the air conditioner wiring through roof braces. Rubbe...

This pins acts as the coupler safety lock on the hitch ball latch. A cotter pin is used to keep the pin in the coupler lock. Cotter pins are availa...

This pins acts as the coupler safety lock on the hitch ball latch. Add a cotter pin to your order. Click here Measures 3-1/8" long and 1/4" in diam...

Found on front LP cover kits from the 1990's through the mid 2000's. Measures 2 inches by 2 inches. Part number 4747A9471

Comes with bracket and hardware. Measures 4-1/4 inches in length. Part number 4755-8091

Clear shower hose guide. The shower hose passes through this guide, and it holds the shower head in place. Part number 4769-9061

Installed under the bed slides. The lashing hook holds the shock cord ends for the bed boots. These are the attachments that the shock cord hooks l...

Latch brackets for the roof and storage compartment latches. Sold in a 2 pack with 4 screws. Measures 1-1/4 inches wide. Please select your color f...

Used to lock the screen door to the roof when the camper is set up. Lock tabs protrude from the sides of the latch, and lock into brackets installe...

Latch strike shim. Measures 2-3/8 inches wide by 5/8 of an inch tall. Part number 4756-3251

Found on the top left and right of the front storage boxes on 1995 Pioneer series pop ups. Pack of two. Measures 22-1/2 inches long, 2-1/2 inches w...

Propane tank bracket. Measures 2 inches at the base and 1-1/2 inches tall. Part number 4772A9431

Comes with everything shown. Part number 4716-0871

Bracket kit for the installation of plastic LP gas bottle covers. Part number 4716-0991

Replaces a broken water heater door latch assembly quickly. Easy to install. 2 per pack. For a how to install video from Camco, click here Part num...

Used to hold the lift pulleys in brackets inside the lift arms. This shorter pin is most commonly found at the top stage pulley. Measures 3/4 of an...

Used to hold the lift pulleys in the stage brackets on lift arms. This longer pin is most commonly found at the lower stages. The next upper stage ...

Used to secure power lines and wiring. 5/8" inside diameter. Part number 4739-415  

Commonly found at the bed bow mounting bracket.  This washer acts as a wear spacer between the brackets and the bow. Measures 1-1/2 inches in width...

Used to space the bed roller on bed rail on post 98 bed rails. Measures 1-5/8 inches in width by 1/8 of and inch thick. Part number 4757A924

These washers can be found in the loop end of the screen door retainer cable, and under lift trims. 5/8 of an inch outside diameter. 1/8 inch insid...