coleman pop up parts

ABS Roof Seal Per Foot

ABS Roof seal.

This is the original Coleman / Fleetwood top seal. Pre cut in 5 or 10 foot sections to repair a section.

This is not an old stock item, this seal was recently manufactured to offer the best in today's seal technology to better protect your camper. A double sided adhesive tape inside the seal allows you to install this product with no glue. An extra spray adhesive has been added to the tape to offer a stronger installation. 

The channel of the seal is about 3/8 of an inch wide at the opening that accepts onto the bottom edges of roof. The whole seal stands 1-1/2 inches tall. 

This seal attaches directly to the bottom of the roof edge. If your roof seal installs to a track inside the roof, look here


Remove the old seal. Clean the area with a 99% alcohol solution. Keep the area wet with a 50% alcohol solution so the seal will slide easily. Re install the seal by pressing the top seal back onto the lip firmly, then use a wooden roller to assure proper contact of the tape. You can choose to install the seal with the tape located to the outside of the roof, or the inside. In either direction the seal bulb will compress and form a tight seal. You may find it easier to install with the tape to the outside of the roof.

Work in small sections at a time. Start at the center of the roof, and work the seal into the corners carefully as not to stretch the seal. To help hold the seal up when installing, use blue tape or masking tape along the edge of the roof around the seal. Cut the remaining seal if any when the whole roof has been re-sealed. The seal has a thin metal inside the clamping area. Heavy snips are recommended to cut the seal. A small amount of super glue will join the two ends together. Allow the seal to cure for 24 hours after installation.

When you open you box you may find that some of the red tape has fallen from the adhesive tape in spots. This will not affect the grip of the tape. We have left the tape removed from a roll for over one year, and the seal installed fine. The film off the tape in spots is caused by shipping, the seal rolled up in a box and the spray adhesive that was added during manufacturing.

For more information on this seal installation, take a look at the following link at The Pop Up Princess for a great pictorial "do it yourself".

Please select your required feet from the drop down menu.

 Directly compatible to the following models, unless the roof has been replaced.

Bayport 1996 1997
Bayside 1998 1999 2000 2001 2002 2003
Carmel 2003
Casa Grande 1998
Cheyenne 1996 1997 1998 1999 2000 2001 2002 2003
Grandview & Grandview SP 1998
Key West 1996 1997
Laramie 1996
Laredo 1996 1997
Mesa 1998 1999 2000 2001 2002 2003
Monterey 2003
Natchez 1998
Niagara 1996 1997 1998 1999 2000 2001 2002 2003
Redwood 1998
Rio 1998
Santa Fe 1996 1997 1998 1999 2000 2001 2002 2003
Sea Pine 1997 1998 1999 2000 2001 2002 2003
Sedona 1996
Shenandoah 1996
Sun Valley 1996 1997 1998 1999 2000 2001 2002 2003
Sunridge 1997 1998
Taos 1996 1997 1998
Utah 1999 2000 2001 2002 2003
Westlake 1997 1998 1999 2000 2001 2002 2003
Yukon 1996 1997