4 caps to replace all the corners on your Coleman or Fleetwood roof.
These are the original completely smooth caps. Two different versions were available originally, these caps were designed to best fit the older two, then were used on the majority of roofs produced after. If your camper has a slightly shorter version, the extra material can be removed from the bottom of the cap.
Please check your parts book for the correct part number. Although these style caps look the same from a distance as others, there was at least one other version that was slightly larger and much more rounded at the top that is not directly compatible.
The one cap style that is not compatible has an alpha characterD in the middle of the part number.
These caps match the single part numbers 4741A1981 / 4741A1991 / 4741B1981 / 4741B1991. They also directly match part numbers 4741C1991 /4741C1981.
In later productions you may find this part number 4716U1981 in your parts book. This is when FCTA had went to selling this 4 pack only. If you find any other these three numbers in your lookup, these caps will work beautifully.
To offer a better solution and fit, we had these caps redesigned with better production techniques. They feature high quality UV stabilized ABS plastic with a hair cell finish
These caps are now non piloted to better fit a wider range of units.
Measures 12 inches tall by 2-1/2 inches wide on each side.
They worked out great! I was so happy that replacements were avaliable. The holes not being pre drilled is actually a great thing for compatability and also you wouldn't want to screw into the original holes as it wouldn't hold well. Fitment wasn't perfect but super close! I used a heat gun to soften the top edge which made it contour the roof better and they look better then new!
The 4 caps were a solid fit. Once we figured out which cap belonged to correct corner, the installation was easy. The screw holes did not match the original holes but that was not an issue since new holes were easily drilled.
I purchase these corners and butyl tape repair kits for my 1994 Coleman Cedar. I cleaned the entire roof with acetone. Sealed the corners and pin holes with aluminum Tape. I used Dicor lap sealant to caulk around all the corners and seams. I used Dicor aluminum roof primer and elastomeric roof paint. Good as new.
The only thing I had a problem with was that they are not marked as to witch corner they are. They also needed to be cut they where to long by 3/4 of a inch.
They are high quality! Fits my 1988 Coleman Columbia pop-up perfectly! They come polar white and with screw holes in the same spot as the originals. I would not hesitate to purchase from this site they came fast and the price is spot on!
I am rebuilding a 1996 Coleman Taos camper.
The corner covers were cracked and needed to be replaced.
These new corners were very similar in shape to the old ones.
They fit but I needed to add extra Butyl rubber sealant to bridge the gaps.
Although the fit wasn't 100% it was 99% and was good enough to only have a small gap to fill in. I'm so glad we have a way to get original parts for our 32 year old popup. Kudos to Coleman Pop Up Parts!
This was just the start of our camper remodel and I could have been happier with these results. Had to do some alterations, but nothing major at all and it looks great.
The previous back corner was broken when we bought the camper a few years ago. Finally got around to fixing it. No leaks but just an eyesore. The replacements fit well. Just a slight change in location of screw holes. Drilled new pilot holes and added a bit of caulk so seal everything up. Looks like new again. Replaced all four since they needed to be resealed anyway. Definitely worth the time and money to repair.
I had a hard time finding these corner pieces but finally found them here at Beckley's. These corners are longer than needed but are easy to cut to length. My only problem was the top didn't match exactly to my top. I heated them up with a heat gun until they were soft and I just shaped them to my top. Worked out perfect and was glad Beckley's had them in stock. I'm ready to go camping now.
The service and shipping were great and the corner caps fit like a glove. Never expected to be able to get replacement parts for my 84 coleman popup I recently purchaced. Im sure I will be buying more parts in the future.
I used these replacement corners on my 2001 Colman Taos. They were a little long so I did have to cut them down about 3/4 of an inch. And the shape wasn't quite perfect on the top. I used Butyl tape underneath to seal amd caulked on the outside. They look great amd went a long way to bringing my camper back to glory.
Very fast shipping. The corner caps were almost an exact match for the original corner caps on a 1994 Coleman Royale Destiny. Just had to shorten them a bit .
I ordered 1 set of 4 roof corners. 1. Came in white 2. They are nor the same size as what I have on my trailer nor the same color. All of my accent pieces are black or gray.
Store owner replied:
So sorry that you didn't see the color or the measurements for your product! Please take a look at the product descriptions and images for all of the details on every product we offer for future considerations in purchasing with us.
"All things come to those who wait." True in this situation. This item had been on backorder for a while so I didn't have any expectations as to when it would be available, if ever, again. I was delighted to get the notification and immediately placed my order for these apparent hen's teeth. Shipping was fast and the items are a perfect fit; just what I needed.
Needed to replace on 1996 Coleman popup camper. Had to trim a bit off bottom, otherwise a perfect fit. Excellent communication from seller. Item was out of stock, but I was notified as soon as it was available. Quick shipping.
