Axle

Product is image #1 and #8 in the illustration, brake assembly complete. Comes with backing plate, 10 x 2-1/4 brake shoes, magnet, and springs. Pr...

Product is for a set of Dexter 10 x 2-1/4 inch brake shoes. One kit services one wheel. To replace brakes on both wheels at one service (recommend...

  Product is image #8 in the illustration, brake assembly magnet. This is the most popular electric brake assembly on Coleman and Fleetwood pop up...

Measurements: Outer Dimension 2.561. Inner Dimension 1.71 Product is for a set of Dexter grease seals, item #2,A in the illustration. One kit serv...

Complete set of wheel bearings. One kit services one wheel. Kit comes complete with inner and outer bearings and races, seal and cotter pin. There ...

Product is for a complete brake drum assembly, item #4 in the illustration. One kit services one wheel. Comes complete with bearings, races, seals...

Product is for a retainer package, item #6 in the illustration. One kit services two wheels. Comes complete with two D washers, two lock rings, an...

Product is for a chrome tall lug nut, item #5 in the illustration. This is the most popular electric brake assembly on Coleman and Fleetwood pop u...

Product is image #1 in the illustration, brake assembly complete. Comes with backing plate, 7 X 1-1/4 Dexter Brake shoes, magnet, and springs. Pr...

Product is for the brake assembly magnet. This electric brake assembly is found on some Coleman and Fleetwood pop ups box size 8 foot and 10 foot...

Product is for a set of Dexter 7 x 1-1/4 inch brake shoes. One kit services one wheel. To replace brakes on both wheels at one service (recommend...

Product is for two wheel seals, item #2A in the illustration. Services two wheels. This electric brake assembly is found on some Coleman and Flee...

Fits axles with 7 inch idler hubs. Measures 1-1/2 inches inside diameter, 1.987 inch outside diameter. 1/4 of an inch in height. Part number 4714B2201

Complete set of wheel bearings. One kit services one wheel. Kit comes complete with inner outer bearings and races, dust cap, seal and cotter pin. ...

Product is for a complete brake drum assembly, item #4 in the illustration. One kit services one wheel. Comes complete with bearings, races, seal...

Product is for a set of lug nuts, item #5 in the illustration. One kit services one wheel. These are the most popular lugs nuts found on Coleman ...

Product is for a retainer package, item #6 in the illustration. One kit services two wheels. Comes complete with two D washers, two lock rings, a...

This nut is commonly found on units prior to 2000 model years. Castle style spindle nut with washer and cotter pin. Part number 4714-3068  

This nut is commonly found on units without electric brakes. Castle style spindle nut with D washer and cotter pin. Fits 1 inch axles. Part number ...

This washer acts as a lock for the castle nuts on the end of the axle spindles. 2 pack. Fits 1 inch axles. Part number 6520180  

Typically found on 8 foot box units with no electric brakes. Fits 1 inch spindles. Comes complete with bearings, races, seal, super Lube dust cap, ...

Typically found on units with no electric brakes. Fits 1 inch spindles. Comes complete with bearings, races, seal, super Lube dust cap, cotter key,...

Rear frame mounted skid plate to assist with steep grades. Series 3800C Measures 12-1/2 inches long by 5 inches tall. Mounting holes are spaced 11-...

The dust cap is found at the center of the wheel hub. It keeps dirt and weather out of the wheel or hub, protecting the bearings. 2" Diameter. Twin...

The EZ lube cap is found at the center of the wheel hub. It keeps dirt and weather out of the wheel or hub, protecting the bearings. 2 Pack. Compa...

This rubber cap presses into the EZ lube cap. 2 per pack. Fits the following caps. Part number 6524860  

These clips attach to the steel wheel and hold the plastic hub caps on. Found on 2000’s Bayside and Niagara models, and 2000’s Grand Tour Elite mod...

White plastic hub cap. Popular on early models, this wheel trim adds style and appearance to the pop up. Measures 7 inches on the inside mounting f...

Chromed wheel trim ring for 13 inch tires   Series 3300 Measures 14-3/8 outer diameter by 11-1/2 inches inside diameter. Part number 4757-0501

Chrome ring for 14 inch tires. Outer wheel beauty ring for Grand Tour series pop ups. The ring measures 15-1/4 inches across the outside, 12-7/8 on...

Popular on Evolution and Highlander series pop ups. Contents include one 14" shock, bushings, washers, and nuts. Part number 4701A0261

Under frame mounted spare tire kit. Comes complete with hardware. Directly matched to 1990 Americana series pop ups. Part number 4749-1351

This bolt kit installs at the rear of many Coleman and Fleetwood pop ups. They extrude from the rear body panel and are installed into a spare tire...

Designed for Americana series. Bracket measures 35-1/4 inches long by 5 inches wide by 6 inches tall. Part number 4748-6481-2  

Bracket measures 21 inches long by 5 inches wide. Series 3501 & 3508 Part number 4765-2871  

Designed for 1992 Americana series. Bracket measures 30 inches long by 4 inches wide by 7-3/4 inches tall. Part number 4748-6481-11819  

Comes complete with spare tire mounting bracket and hardware. Designed for 1992 Americana series. Bracket measures 35 inches long by 5 inches wide....

Designed for 1992 Americana series. Bracket measures 35 inches long by 5 inches wide. Part number 4748-648-BRACKET-ONLY  

Rear support bracket for the spare tire.  Popular on 2000's Grand Tour series units. Measures 23-3/4 inches tall by 6-1/8 inches wide. Part number ...

Rear support bracket for the spare tire. Measures 19 inches tall by 3 inches wide. The bottom projection measures 5 inches long. Part number 4747-5...

Rear support bracket for the spare tire. Popular on 2000's Grand Tour series units. Series 3500 Measures 23-3/4 inches tall by 6-1/8 inches wide. T...

Rear support bracket for the spare tire. Popular on Destiny series units. Measures 23-1/2 inches tall by 6 inches wide. Studs measure 6-1/4 inches ...

Rear support bracket for the spare tire.  Popular on 2000's Grand Tour series units. Measures 23-3/4 inches tall by 6-1/8 inches wide. Part number ...

Rear support bracket for the spare tire. Measures 24-1/2 inches tall by 6 inches wide. The studs for the spare tire mounts extend 6-1/2 inches. Par...

Designed for both 2005 Grand Tour models and 2006 to the end of production Americana models. Comes with installation instructions and mounting hard...

A frame tongue mount kit for late 1970's Coleman utility equipment. 1/2 inch bolts measure 6 inches in length. Part number 4738A5361  

Diamond plate metal wheel well. Popular on Pioneer, Destiny and Americana series pop ups. Measurements included are of the wheel well body not the ...

Measurements included are of the wheel well body, not the lips. Measures 20-1/2 inches wide, 13 inches deep, and 6-1/2 inches tall. Part number 474...