Works with almost every Coleman or Fleetwood pop up camper. It slips into the drive hub, or over the crank shaft. Directly compatible for all units from the 1970's through the 2011 model years with pins located no more than 1-3/4 inches.
Fits : All 3/8-inch drills
Large : Measures 8 inches long
Fits inside drive hubs measuring 7/8"
Locking : 3 Sided machined shaft
Compatible with most Coleman Fleetwood pop ups
Durable Construction: Durable, zinc-plated construction
This adapter will also work with 17 and 20 inch screw down corner stabilizer jacks on Coleman and Fleetwood pop ups. 18 Volt plus drills are recommended.
Please note : Consider taking measurements of your campers lift attachments. Although this adapter will work perfectly with most units, there are some versions that it will not.
For units from the 1970's through the 1990's that do not use a drive hub extension tube, this adapter works perfectly.
For units that use a drive hub extension tube and have the pin placed less than 1-3/4 inches deep, this adapter works perfectly.
For units that have a direct drive system, located in the center of the bumper with more than 7-1/2 inches of reach, this adapter will not work.
The inside diameter of this tool for units that have drive shafts to raise the roof is 11/16th of an inch. Find more measurements of this tool in the final images
Part number 48862
Customer Reviews
Overall rating: 3.8 / 5 from 163 reviews.
We currently have an early fall nor-easter heading our way. That drill adapted crank saved me precious time in lowering my coleman popup. Just chuck it in the drill. Put the drill in low speed range and the lowering was fast and effortless. My camper is now safely tucked away under it’s new R V cover and that early fall storm can rage till its predicted end a few days from now. I’ll use the new crank again to raise the popup after the storm blows itself out by this coming Tuesday. The crank makes set up and takedown much easier and a pleasure to perform. Bye!
A must have item. What are you going to do if you loose your crank handle?
Works on the rear lift drive and stability jacks too.
Chuck end is 3 sided to easily fit any cordless drill chuck that can accept a 6/16th drill bit.
If your drive shaft pin is too far in to catch the tabs, drill a new hole closer. See photos.
(Please don't be the campground idiot that uses a loud impact drill for this tool.)
It works perfect for the jack stands but it definitely does not help raise the pop up. It fits and the edging keeps slipping on the drill. I used a craftsman and Ryobi but it keeps slipping on both.
Trailer I want to use this tool on.....haven't had a chance to use it yet, but looks like it should work if I have the muscle to hang on to the driver! Looking forward to using it in June.
Unfortunately, the part is flared out as it extends to the drill bit, so it will not fit in the slot. Bummer. A little thought on the part of the manufacturer could have avoided this. Oh well.
This item does NOT fit in the Coleman Pop-up crank shaft. The “wings” on the part are too wide to fit, and are too close to the slot on the end of the bit, so it does not catch the metal flange in the crank shaft and just spins freely instead. Thus, this part is unable to be used as intended, and is essentially a paperweight. The camper in question is a 2009 Coleman Sea Pine popup. I believe I am past the window to get a refund, so I am pretty unhappy.
We recently purchased a secondhand 2009 Fleetwood Evolution and wanted a handcrank with a drill attachment. I didn't think it would be possible given the age of the trailer but we were able to match the part number and purchase from this site.The product price and shipping price was what we expected to pay for such an specific item and it arrived as scheduled. Would definitely purchase from here again.
This part didn't fit my camper as was described to me wouldn't fit all the way in completely i reach out to someone about part a month a two ago and never got a response.
Store owner replied:
Kevin,
We found 7 emails to you about this issue covering the measurements and pin relocation to make it work on your camper. You settled on returning the item for a refund. Thank you!
Coleman Pop Up Parts
Works great! Makes raising and lowering so much easier!
This will not fit to raise the top on my 2001 Coleman Mesa camper. It will not go deep enough in the tube to lock in to the spring pin. Works fine for the stabilizer feet.
Still working on it but the parts fit perfectly and I’m very happy with the service and how quickly they were delivered. I’m sure I’ll be ordering more stuff. Thank you so much
Store owner replied:
Try tapping the end of it closed just a fuzz. Place it on concrete, and tap the end with a hammer. 9 times out of 10 this works!
I had to relocate the pin closer to the end of the tube, and then my 20v Hart drill from Wal-Mart still wouldn't lift the roof. Lowering the roof was a breeze. Perfect for the stabilizer jacks, though. Great product. I'll have to try it with a corded, variable speed drill.
